Most people enjoy RV road trips particularly with the whole family or with their friends. It is a wonderful time to go anywhere you desire to go with a completely self-sufficient vehicle stocked with all you will need to eliminate stops on the way. You will need appliances like televisions, fans, radio, laptops, hair driers, a cooker etc, for all your needs during the trip. Therefore you will need a lot of fuel for these appliances, this can make a lot of noise pollution and air pollution which can make the trip both expensive and stressful.

Well, there is a solution. I will be showing you a better way to go on a RV trip with your friends the next time you plan for one. Use a RV portable solar panel to power all your energy needs. I will show you how using an RV portable solar panel will help you avoid cost and help you enjoy your trip.

Here is my plan for an enjoyable RV trip using an RV solar panel.

Blueprint 1.

Set up a solar panel in your RV. Use the benefits of the sun energy and make sure your RV has a solar panel set up, or you can do this yourself, by following a detailed manual. The sun generates direct current (dc) energy and since most recreational vehicles uses DC energy for power, they fit.

Blueprint 2.

It saves you a lot of money during the trip and after the trip. The solar scheme is not expensive when you look at it properly. Having it will definitely pay for it self over a long time as you can use it for years and the power generated can still be used for your home needs, and other small business concerns even after the trip.

Blueprint 3.

Beating the inflation cost of an RV solar panel. You have to factor in that the costs of solar panels have been eroded by inflation when you factor in fuel bills and regular bills for electricity. You will agree with me the RV solar panel is a better substitute.

Blueprint 4.

Lets you stay longer on the trip and enjoy your moments. If the RV solar panels are completely functional then you will require less fuel and can travel further distances and still endure the trip as the panels will keep the accumulator charged which will produce energy for your vehicle and your appliances.

Blueprint 5.

Make it healthier and more refreshing. The solar kit can give the power needed for the night hours and freshness of the environment as the energy produced does not make noise. The air is fresh and the environment is ok. So you can have a quiet time to properly enjoy the trip.

Blueprint 6.

The environment is deteriorating. Environmental protection is the current message of the world and you will be contributing to this great campaign by using RV solar panels to generate your own power. Hence enjoy nature and contribute to preserve it.

More and more people are addressing Portable Solar Power each day. See how you can join the movement with best RV Portable Solar Power panel reviews/tips and product guides.

Grab pragmatic tips in the sphere of suspended ceiling – go through this site. The time has come when concise info is really within your reach, use this opportunity.

This editorial will point out the money that you could be wasting by not being as energy efficient as you could be. I will show you some simple everyday tips that will ease the earths finite resources while saving money in your pocket.

The simplest of all is to switch off lights when you’re not within the room. Switching off computers can conjointly save a heap of energy, simply the computer fan alone uses around 300 watts which is like having on 15 low energy light bulbs. Modify all of your old light bulbs to CFL (low energy bulbs). Most folks complain that these lights are dim, but once on for a time they heat up and become much brighter. Most household appliances have standby lights on them, did you recognize that a DVD recorder will use one hundred watts in standby mode? Most people have DVD’s and TV’s and just by switching them off totally you’ll right away be saving yourself money. Strive to induce the entire family to get involved by turning off unused appliances, you will be amazed on your next electric bill how much you saved.

Some energy utilities are supplying energy meters free of charge, so why not get one of those and then you’ll see for yourself how much energy you are saving every day ?

Another straightforward energy saving tip is to use an egg timer while you or your family take a shower. Set it to a time of five minutes, when the bell rings flip the shower off. A family of four taking a five minute shower per day will use around three kilowatts if heated by electric; you’ll be able to double this for a ten minute shower. If you’ve got a water meter you will conjointly be saving half on your water bill. Turning off the faucet when you are brushing your teeth and boiling the proper amount of water in your kettle will conjointly save you cash on electrical and water bills.

Many modern properties have full central heating installed; the most common can be powered by gas, this is generally cheaper to run than most electrical systems. The simplest means to control central heating is by an area thermostat, just turning the space stat down by one degree can save a ton of energy and you may see a massive reduction on your bills.

Dinning rooms, living rooms, and kitchens are best heated up to twenty one degrees this is the temperature that we have a tendency to feel most comfortable at. Bedrooms ought to be set to 18 degrees or less; this is the optimum temperature for the most effective nights sleep. Bedrooms can be controlled by TRV valves (radiator thermostats) these don’t seem to be difficult to put in but you’ll most likely need a plumber to fit this for you.

The newest condensing boilers are great at saving energy, being 92% efficient. A floor mounted open flue boiler can be only 65% efficient and thus it’d be best to interchange this as soon as possible. A programmable roomstat is excellent for controlling area temperatures. Several of the newest roomstats can have 6 differernt time zones during a day that will be set to 6 completely different temperatures to suit you.

Hot water cylinders come in all shapes and sizes. A number have a layer of foam lagging, a few have a jacket and I have even seen hot water tanks with no lagging!. Your nearest builder’s merchants will sell a retrofit jacket to put on your cylinder, so the thicker the lagging the longer the water stays hot which in turn leads to you saving money.

Saving water is easy: you can place a brick within the bathroom cistern or a sealed plastic bag with water in and place within the cistern making sure, of course, this does not interfere with the ballcock. This alone might save a litre of water per flush. If you wash your vehicle make sure you use a spray gun on the hose rather than wasting the water by letting it just flow down the drains. Turning the tap off when cleaning your teeth is additionally a massive saver of water, particulary once you keep in mind that we should spend a minimum of 3 minutes each time we clean our teeth.

Lagging the loft saves monumental amounts of energy and this need not be very expensive. You’ll get lagging companies to do this for you; if you’re over 70 you will be ready to get it free. While your loft is being lagged you may also have your brick cavity walls filled with chopped fibre lagging. Did you know that the warmth loss from your roof can be up to thirty percent and your walls up to forty percent?

Making it airtight around ill fitting doors and windows can also help to conserve energy and warmth. If you’ve got an open hearth, sealing this when not in use saves warmth as heat from your central heating simply goes straight up the chimney. There is a purpose engineered balloon you can purchase to put up the chimney, simply remember to pull it out if going to reuse the fireplace.

With all the cash you’ve got saved by changing your living habits, why not place this towards having a solar panel installed? Having solar panels could provide all your hot water during the summer months for free. However, one small point to remember is simply to make sure the cylinder gets up to sixty degrees once a week to make sure that any bacteria in the water is killed off.

When you stop and think about it, all the suggestions above are simple and easy to do. The most important factor of all is that you are helping the earth and future generations but you’re additionally helping yourself to avoid wasting money.

Grab pragmatic advice in the sphere of suspended ceiling – please make sure to study the publication. The time has come when concise info is truly within your reach, use this chance.

Perhaps you are happy with the status quo of today. Perhaps you feel all is fine and you don’t feel the need to change a system that’s worked for over a century. If you do, consider a few of the benefits of solar power and you may just recognize its potential in a somewhat more responsible and unselfish light.

I don’t care about the environment?

Perhaps everything in the world is fine with your life. The last thing you care about are trees, fresh air, and clean water. Heck, the water shows up every time you turn on a faucet, the heat comes on when it’s cold, the light switch brings you light. What’s there to worry about? Consider that this is just the problem. If you don’t care for the environment, the faucet may not bring you clean water, the heat may not go on and the car certainly will not start. If the environment is kept clean and left to do what it was intended to do, everything will continue to work fine. But get in its way and everything you thought was fine won’t be for long.

One way to accomplish the goal of keeping all the comforts of home working properly is by using other sources of power generation like the sun, not generating nasty things that get in the way of the environment doing its job. Current sources of power come from dead things like old forests gone millennium ago. Environmentally responsible power, heat, and transport come from living or energized things like water and oxygen molecules. Sun can be turned into electricity and used to power your car, heat your home, and generate your light. But to make the process work, you need to be able to see the sun, which means caring for the environment and not getting in its way.

Cost savings

One of the best things about caring for the suns ability to do its job is that it saves you money in the long run. Once solar systems are purchased and installed, they cost little if anything to operate. In most instances, the government will even help to pay for the upfront costs of installing the system through tax incentives. Additionally, power companies in most regions are required to pay you for energy that you have generated and not used. Yes, you read correctly, the power company will pay you!

Profitable

In most instances, 70% of the northern hemisphere can generate enough solar power to run and heat their homes with existing solar systems. This means that whatever is left over goes back to the power grid if you so choose. Just think of your power meter running backwards. The extra power you need for that cloudy day is stored in ever more efficient batteries. Most current users indicate that the use of solar systems only takes a little thought in power management.

Off the grid

Depending on how you feel about the topic, one of the better reasons to use solar power is that you can take yourself off the “grid” so to speak. Many people don’t enjoy being a part of the social collective that is interconnectivity. Going solar takes you away from this one aspect of community and puts you closer to self reliance.

Versatile

Even though the solar power generation systems of today have come a long way to providing power, heat, and a host of other services there is a long way to go. This is not to indicate, however, that solar power is not currently versatile in form and function. Solar panels can currently be formed into thin sheets for car top electric powered cars. They can cover suburban rooftops and not be noticed, unlike those 1970’s units. Costs are also coming down almost as fast as the flat screen TV’s of today. Flat screens that solar power can power through the use of a process called photovoltaic’s.

Personal responsibility

Aside from the cost savings and environmental benefits that solar power brings, you are part of a larger social order that will procreate. The human species has not been around for all that long and is doing its best to end its run in one way or another. If you would like to give your children’s children a better shot at continuing the human species on this planet, solar power is one small contribution that you can make.

Learn how to create electricity and save your bills!! Read on how you can make your very own solar panels at your own home! small solar panels small solar panels

Fire Safety and Protection

Fire safety is a particularly important consideration, since the roof is vulnerable to fire from overhead or airborne sources. The fire resistance of roofing materials is tested by the Underwriters’Laboratories, Inc. (UL), an independent, not-for-profit public safety testing laboratory. UL established the standard for the testing of roofing materials with the assistance of nationally recognized fire authorities.

Manufacturers voluntarily submit materials for testing. The materials then are classified and labeled according to the classes below. The American Society for Testing and Materials (ASTM) is a voluntary organization concerned with the development of consensus standards, testing procedures, and specifications.

Class A. The highest fire-resistance rating for roofing as per ASTM E-108. This class rating indicates that the roofing material is able to withstand severe exposure to fire that originates from sources outside the building.

Class B. This fire-resistance rating indicates that the roofing material is able to withstand moderate exposure to fire that originates from sources outside the building.

Class C. This fire-resistance rating indicates that the roofing material is able to withstand light exposure to fire that originates from sources outside the building.

Many communities require new roof coverings to meet at least the UL Class C standard. This requirement has the backing of nationally recognized authorities such as the National Fire Protection Association and the International Association of Fire Chiefs. Some roofing materials, such as slate and clay tile, offer natural fire protection. Asphalt shingles are manufactured to meet the Class C standard or better. Readily combustible materials, such as wooden shingles, do not meet the UL standard unless they have been chemically treated for fire retardancy.

Wind Resistance

UL also tests shingle performance against high winds. To qualify for the UL wind-resistant label, shingles must withstand continuous test winds of at least 60 miles per hour for two hours without a shingle tab lifting. Wind-resistant shingles demonstrated their effectiveness under hurricane conditions during the winds brought to Florida in 1992 by Hurricane Andrew, which at the time was the worst hurricane ever recorded in the United States.

Self-sealing asphalt shingles that bear the UL wind-resistant label are manufactured with a factory-applied adhesive. Once the shingles are applied, the sun activates the preapplied thermoplastic sealant and each shingle is bonded to the one below it. Although self-sealers originally were developed specifically for high-wind areas, they are standard in most parts of the country today.

Estimating Life Expectancy

In addition to fire and wind ratings, roof coverings have a life expectancy. Manufacturers offer a guarantee or warranty for their products. For example, most of today’s asphalt shingles are designed to provide satisfactory service for 15 to 25 years.

Generally, the longer the life expectancy, the more expensive the shingle material. You might find, however, that a more expensive shingle is more economical in the long run because the cost of materials and labor is amortized over a longer period of time. Keep in mind that while the labor cost to apply the shingles varies with the product, it is the same whether the life expectancy of the shingle is 15 or 25 years.

Estimate the probable annual cost of a new roof by adding the cost of labor and materials and then dividing the total by the shingle’s design life. The formula for determining the annual cost of use is:

Total cost (material and labor)/design life = annual cost of use.
For more information just see interior architecture and interior decoration design.

Gain pragmatic things to know about suspended ceiling – please go through the publication. The times have come when proper info is truly only one click of your mouse, use this chance.

Common Mistakes in Designing Your Own Home

Most mistakes made in designing your own home come from the planning stage. The lack of planning during the planning stage can result in some fairly common mistakes that when revisited by the designer seem rather simplistic. Budgeting is also a big area where common mistakes occur.

Planning Mistakes

Determining which way the home will face on the building site. This is seemingly simple enough but often times over looked. It is important especially if the building site butts up to someone else’s property or to someone else’s home. There are actually building codes in place regarding placement of bathrooms when a home is built next to another one.

So the design needs to take into consideration where the home will be placed on the building site. This element also affects where the driveway will be placed, whether there will be road access and whether the entrance to the home will look natural or unnatural. Another factor to consider is which way the natural light will fall on the house; this will affect heating/cooling costs. Make sure the site is well suited for building before the designing begins. It is no surprise that many pieces of property cannot support the size of the home being built. Every community has building codes and ignoring these codes or not knowing them can foil a design plan. So to avoid this common mistake check building codes in the area the home is to be built to insure the design is well suited to meet the codes or requirements of the area.

Not spending enough time on the design is also a common mistake. Every hour spent designing the home is two hours saved on the building site in corrections. Expect revisions as most home designs go through a series of revisions before the final plan is drawn up. Spend the time that is needed on the design plan. Make sure that there is an availability of materials for the project. If the home design is for a specific type of constructed home from a semi-exotic material make sure that there is an availability of that material. Not taking into consideration plumbing, electrical, or a heating and cooling apparatus is also a common design mistake. Getting distracted by aesthetics and not considering the functionality of the space will cost you money during the building phase of the project. Again knowing the codes for plumbing, electrical, heating and cooling is important. Check to make sure there are no special requirements for the building site such as a home owners association in the area you intend on building that may have special by laws for that neighborhood. Failing to check with the home owner association (if there is one) can be a huge mistake because some by laws instituted by developments can regulate the size, shape, and other factors of what can and cannot be built. Plan ahead and avoid what can be avoided.

Budgeting

Budgeting is another area where common mistakes occur in designing your own home. Budgets cannot be so stringent that there is no room for error. A safe bet is to add $20000 to the budget for errors. Perhaps the $20000 will wind up not being used, but more than likely some of it will be used. Underestimating costs is also a common mistake. To avoid this error overestimate the costs so that when designing your home you will not be put out on a limb financially. Be realistic about the budget so you can avoid common mistakes in designing your own home.

For more information just visit home design and design ideas.

Access helpful recommendations about how to install suspended ceiling – make sure to study the web site. The times have come when concise information is truly at your fingertips, use this chance.

We have ways to heat our water, our homes, and to produce electricity. We probably take all of this for granted and if we lost them we would probably panic. We take for granted that these conveniences will be there for us from now on. We expect glitches to happen but we want them to be fixable without going long without all of these. We appreciate the heat in the winter when it snows outside and when the temperatures drop. We need water to live and although it is usually running under the ground we want the convenience of it running through our pipes and into our homes.

Electricity is nice when you can have lights with just a simple flick of the switch. In the summertime we experience some power outages when everyone turns on their air conditioners in order to tolerate the extreme temperatures beating down from the sun. This heat is sometimes so intense it can make someone, who has trouble breathing, struggle for every breath.

The sun is a very intense ball of gas up in the atmosphere. It burns twenty four hours a day, seven days per week. We only see it during out daytime but on the other side of the globe they get the daytime when we get the night. When the sun light beams down on the earth’s surface, a small percentage of the solar radiation heading for earth gets reflected. There are larger amounts of the sunlight that is actually absorbed. When you consider the fact that the sunlight must go through fog, clouds, dust particles, and harmful pollutants in order to reach us, the amount of sunlight that we receive is even less. When it finally makes it to earth’s surface it is then radiated back into space. When it reaches the earth, plants and vegetation absorb it and the oceans, winds, and other resources absorb the sunlight as well.

Some people use heat generated from the sun to heat homes, create electricity, and provide water to their families and businesses. When you think about all that you have that runs through a machine it may be possible to reroute that in order to run it all by sunlight. Scientists have only started to make this possible but it is far from being completed. When you consider all the solar energy that reaches the earth’s surface and then radiated back into the atmosphere, you could create electricity, heat, and water from now on. This solar energy can be redirected and concentrated using special boxes that attract the light during the day to heat water and homes throughout the night.

Solar power is very important and provides a natural way to heat, obtain electricity and water with just a little more effort. In the future we may have no other choice but to look at natural resources in order to have these necessities and conveniences. Solar power is important now and in the future.

To learn how to build your own alternative energy, visit home made energy review. This home made energy review will tell you more about the benefits, pros, and cons of home made alternative energy. Read more at home made energy review.

If you have ever seen a field with several mirrors pointing toward the sun you may be looking at a solar power system. These systems work to concentrate the sunlight to one area and use the heat to heat up the liquid that flows along the pipes. This system is called Parabolic-trough system. This type of system heats oil that is flowing through the pipe. The oil is hot and is used to boil water to power a steam generator which in turns powers electricity.

The reason that this system works so well is because the U-shaped mirrors attracts and collects the suns heat which is then transferred onto the receiver. The receiver absorbs the heat and transfers into fluid which helps to power the engine. The heat causes the fluid to swell up against the piston and that produces mechanical power. This type of power can be used to run things like generators or even an alternator that will produce electricity. This system works great because it uses molten salt that flows through the receiver. When the salt heats up it can generate electricity through the steam generator. The salt holds in the heat for several days before it has to be converted into electricity. Because this system uses so many panels it is mainly used for industrial solar power where acres of land can be donated to the Parabolic Trough. There can be enough power in the network that can create energy for several days or more. Because this system is so large it allows the heat that it saves to be transferred days later.

Through this project and other solar power projects we can understand fully how solar power works. When we see how much solar power is conserved using these U shaped mirrors we can also understand how much energy is lost.  Concentrating solar power systems are beneficial to the businesses that use them because they don’t have as much time down when the power fails. Machinery is their only major concern and as long as their machines are taken care of there should be no problem. The industrial type of solar power can attract and trap a lot of heat from the sun during the day, especially using mirrors that will reflect the sunlight. It also helps to have this type of solar power out in an open field free of trees and vegetation that may grow around and crowd the solar light.

Scientist are continuously studying this theory as businesses use it to power their machinery. Steam power was what was used from the beginning with solar power and is still what most systems depend on to service their production needs. In the future, fields may eventually be full of mirrors that point up to the sky in hopes of generating enough energy to heat the world. Until then we will use the traditional methods of heating water, heating our homes, and creating electricity.

Are you tired of receiving huge monthly electricity bill? Visit: save electricity with a diy kit. save electricity with a diy kit tells you a great idea about not only how to save electricity but also you can help your mother nature to get rid of pollution and global warming. Read more at save electricity with a diy kit.

The current use of fossil fuels will decrease over the future years, due to their associated connection with climate change, political and social issues and also the fact that fossil fuels simply can’t last forever. There are so many reasons why a move away from fossil fuels will be better for everyone, except the oil companies. Fossil fuels were formed from decaying animal and plant matter and through time, heat, and pressure creating oil, gas, and coal. Fossil fuels are also a store of carbon, this is the issue with global warming and climate changes. As this carbon is stored below ground, it is not part of the current carbon cycle as today’s plants and animals are. So by burning fossil fuels we are then placing additional carbon into the atmosphere in the form of carbon dioxide. Increased levels of carbon dioxide are one of the main reasons for global warming. Other forms of energy need to be explored to address the issues of climate change. There are many different forms of energy available to us in terms of plants for example, which if they can be used for energy are referred to as biomass. The most well know form of biomass is obviously wood, in the form of a log fire for example, however there are so many other forms of biomass that can be used for fuel, including many different types of grasses and energy crops, and waste residues including straws such as barley and wheat straw and corn cobs. The problem with most forms of biomass is in the raw state, it is hard to extract the energy efficiently.

Biomass pellets are a way to efficiently harness the energy contained within biomass. First, biomass pellets are a compressed form of the original biomass. The high density has two advantages; density fuels burn far more efficiently, producing more heat and energy with less particulates in the form of less smoke. Once a biomass pellet fire gets up to temperature, the human eye is unable to see any smoke from the chimney, only a heat trail. Secondly upgrading biomass into pellets dramatically reduces transportation costs. As the pellets are much denser it is possible to fit far more weight of material on the back of a lorry or boat. This therefore results in less costs and congestion. Pellets are also uniform in their shape, size, and moisture content. These features mean pellets are more suitable for automatic systems than the raw biomass and temperature can be precisely controlled due to the uniform moisture content.

Learn more about Pellets Mill and Pellets Mill Press

In order to know where to find solar energy you must first know what solar energy is. Solar energy is energy from the sun. When the sun is shining, solar energy is being produced as it sends the heat radiating to the earth. You can find solar energy anywhere the sun can shine. There is a way that you can save the sunlight in order to provide heat during the cold, which is what millions of people have done throughout the years. It started thousands of years ago when people where able to use a thick lens or magnifying glass on an object that would attract the suns rays on that particular object and could get so hot it would catch fire. This gave a new prospective on how strong the heat from the sun really was.

The problem with capturing the suns heat is the fact that when it reaches the earths surface it does not go to one particular spot. It is spread evenly over the earth where the sunlight is able to reach. When this happens you may find it difficult to heat something using only the sunlight. Although the area or object may be hot if left in the sun too long it will not reach the full heating potential of the sun’s light.

In order to use the heat efficiently to heat a room after the sun goes down or when the sun is unable to shine because of clouds you will need to use a source that will attract the heat to one particular area. This source is called a solar collector. The solar collector attracts a lot of sunlight to one particular area allowing the sun to pass through the source and into the space. The objects in the space absorb and hold the heat from the sunlight trapping it so it will not get back out. Glass is a great solar collector because it allows the sun to pass through it and into the space but the heat from the sun can rarely escape leaving the space under the glass to become warm or hot from the heat. The objects in the space help to hold the heat as it comes in so that the space will stay warmer longer. This allows the area to be heated using solar power.

Because glass is a natural solar collector it makes it great to put into a greenhouse or a sun room. The glass attracts the sunlight and traps the heat inside so that the temperature in the greenhouse or sun room remains warm even at night when the temperature outside may be cold.

Solar energy can be found anywhere the sun shines but in order to use the heat you must have direct sunlight for an extended period of time. If you just use the morning sun to heat your home your house may not stay warm through the night.

If you have always wanted to know about green energy sources and how to take advantage of them but don’t know where to get proper information, then you should visit energy 2 green review. This energy 2 green review will tell you all about green energy and how it can help you live a greener more environmentally conscious existence. Read more at energy 2 green review.

It is a well known fact that the sun is the strongest from the south. People who want to conserve solar power use this theory in order to get the most sun into their homes with minimal expense. If you are building a home that you want to be solar power, it is best to put the most windows facing the south side. Although it is not always true, depending on where you live, it is a general rule to go by. Passive technology turns sunlight into heat that can be used for several things, including ventilation and cooling. You can heat homes and businesses with passive solar. Passive solar systems depend on gravity fed and natural resources in order to make passive solar work. If it uses a pump or fan to force the liquid through, than it is an active solar.

Passive solar technology offers direct and indirect gain for heating spaces, water heating systems, use of thermal mass and also phase change materials which helps to regulate the temperature indoors. There is also the solar cooking equipment, the solar chimney which allows for ventilation and earth sheltering. Passive solar can also be found in a solar furnace and solar forge, although these are a little more complicated. Sun rooms are another example of passive solar power as it lets the sun come into the room without allowing it to escape. There is no mechanism or no engine to power just the clear panes of glass attracting the sun and trapping it within.

Solar gain is referring to the increase in temperature in an area, an object, or a structure that is a result of solar radiation. The stronger the sun the more solar gain you have. A solar furnace is any huge object that is created in order to channel the heat directly to one place. The heat can be unbearable but it does produce a lot of electricity from it. Temperatures can reach up to 3,000 degrees. When you compare the expenses associated with passive solar you realize that the cost of passive solar is minimal when you compare it to active wear.

Because there is no mechanism to power it makes it more affordable. With active solar you must have a device that can power the heat that you take in and use. Passive solar is the most popular with those who are experimenting with the concept of solar power and may find that they like it enough to stick with it. When you are ready for an upgrade it is easy to move up to active power. Adding a mechanism that will easily and conveniently pump the water through a source is an effective way of combining today’s technology with conservation and preservation.

Passive solar power is something that we will be seeing a lot of in the future as the need for solar power becomes more in demand. There will come a time when even those who depend on active solar may have to switch to passive solar.

To save the earth and totally avoid global warming, visit: benefits of biomass. benefits of biomass tells you about many advantages over fossil fuels and their help in reducing greenhouse effect. Read more at benefits of biomass.